diff --git a/bindicator.yaml b/bindicator.yaml
new file mode 100644
index 0000000..bfcebda
--- /dev/null
+++ b/bindicator.yaml
@@ -0,0 +1,101 @@
+esphome:
+  name: bindicator
+
+esp32:
+  board: esp32-c3-devkitm-1
+  framework:
+    type: arduino
+
+logger:
+ level: INfO
+ baud_rate: 0
+
+ota:
+  password: "bd2c004f2016fde90fbbb01706ad039a"
+
+wifi:
+  ssid: !secret ssid
+  password: !secret pass
+
+mqtt:
+  broker: mqtt.srv.jnf.me
+  username: esphome
+  password: esphome
+  topic_prefix: esphome/bindicator
+
+light:
+  - platform: neopixelbus
+    name: "Bindicator"
+    id: bindicator
+    variant: WS2812X
+    pin: 0
+    num_leds: 2
+    effects:
+      - lambda:
+          name: Pulsing
+          update_interval: 1s
+          lambda: |-
+            static int loopnum = 0;
+            auto call = id(bindicator).turn_on();
+            call.set_brightness(1);
+            call.set_transition_length(1000);
+
+            if (loopnum == 0) {
+              call.set_brightness(0.5);
+            } else if (loopnum == 1) {
+              call.set_brightness(1);
+            }
+            call.perform();
+            loopnum++;
+            if (loopnum == 30) loopnum = 0;
+  - platform: partition
+    name: "Bindicator - Bottom"
+    id: bindicatorbottom
+    segments:
+      - id: bindicator
+        from: 0
+        to: 0
+    effects:
+      - lambda:
+          name: Pulsing
+          update_interval: 1s
+          lambda: |-
+            static int loopnum = 0;
+            auto call = id(bindicatorbottom).turn_on();
+            call.set_brightness(1);
+            call.set_transition_length(1500);
+
+            if (loopnum == 0) {
+              call.set_brightness(0.5);
+            } else if (loopnum == 1) {
+              call.set_brightness(1);
+            }
+            call.perform();
+            loopnum++;
+            if (loopnum == 30) loopnum = 0;
+
+  - platform: partition
+    name: "Bindicator - Top"
+    id: bindicatortop
+    segments:
+      - id: bindicator
+        from: 1
+        to: 1
+    effects:
+      - lambda:
+          name: Pulsing
+          update_interval: 1s
+          lambda: |-
+            static int loopnum = 0;
+            auto call = id(bindicatortop).turn_on();
+            call.set_brightness(1);
+            call.set_transition_length(1500);
+
+            if (loopnum == 0) {
+              call.set_brightness(0.5);
+            } else if (loopnum == 1) {
+              call.set_brightness(1);
+            }
+            call.perform();
+            loopnum++;
+            if (loopnum == 30) loopnum = 0;
\ No newline at end of file