esphome:
  name: bindicator

esp32:
  board: esp32-c3-devkitm-1
  framework:
    type: arduino

logger:
 level: INfO
 baud_rate: 0

ota:
  password: "bd2c004f2016fde90fbbb01706ad039a"

wifi:
  ssid: !secret ssid
  password: !secret pass

mqtt:
  broker: mqtt.srv.jnf.me
  username: esphome
  password: esphome
  topic_prefix: esphome/bindicator

light:
  - platform: neopixelbus
    name: "Bindicator"
    id: bindicator
    variant: WS2812X
    pin: 0
    num_leds: 2
    effects:
      - lambda:
          name: Pulsing
          update_interval: 1s
          lambda: |-
            static int loopnum = 0;
            auto call = id(bindicator).turn_on();
            call.set_brightness(1);
            call.set_transition_length(1000);

            if (loopnum == 0) {
              call.set_brightness(0.5);
            } else if (loopnum == 1) {
              call.set_brightness(1);
            }
            call.perform();
            loopnum++;
            if (loopnum == 30) loopnum = 0;
  - platform: partition
    name: "Bindicator - Bottom"
    id: bindicatorbottom
    segments:
      - id: bindicator
        from: 0
        to: 0
    effects:
      - lambda:
          name: Pulsing
          update_interval: 1s
          lambda: |-
            static int loopnum = 0;
            auto call = id(bindicatorbottom).turn_on();
            call.set_brightness(1);
            call.set_transition_length(1500);

            if (loopnum == 0) {
              call.set_brightness(0.5);
            } else if (loopnum == 1) {
              call.set_brightness(1);
            }
            call.perform();
            loopnum++;
            if (loopnum == 30) loopnum = 0;

  - platform: partition
    name: "Bindicator - Top"
    id: bindicatortop
    segments:
      - id: bindicator
        from: 1
        to: 1
    effects:
      - lambda:
          name: Pulsing
          update_interval: 1s
          lambda: |-
            static int loopnum = 0;
            auto call = id(bindicatortop).turn_on();
            call.set_brightness(1);
            call.set_transition_length(1500);

            if (loopnum == 0) {
              call.set_brightness(0.5);
            } else if (loopnum == 1) {
              call.set_brightness(1);
            }
            call.perform();
            loopnum++;
            if (loopnum == 30) loopnum = 0;