Adding bindicator

Adding one additional LED to each segment

basement.yaml

@@ -15,7 +15,7 @@ wifi:
   fast_connect: true
 
 mqtt:
-  broker: henry.int.jnf.me
+  broker: mqtt.srv.jnf.me
   username: esphome
   password: esphome
   topic_prefix: esphome/basement
@@ -48,4 +48,8 @@ binary_sensor:
     device_class: moisture
     filters:
       - invert
-      - delayed_off: 5s
+      - delayed_off: 5s
+
+button:
+  - platform: restart
+    name: "Restart"

bedroom-lightstrips.yaml

@@ -17,7 +17,7 @@ wifi:
   fast_connect: true
   
 mqtt:
-  broker: henry.int.jnf.me
+  broker: mqtt.srv.jnf.me
   username: esphome
   password: esphome
   topic_prefix: esphome/bedroom-lightstrips
@@ -42,7 +42,18 @@ light:
       - addressable_rainbow
       - addressable_color_wipe
       - addressable_scan
-      - addressable_twinkle
+      - addressable_twinkle:
+          name: Twinkle Light
+          twinkle_probability: 5%
+          progress_interval: 10ms
+      - addressable_twinkle:
+          name: Twinkle Medium
+          twinkle_probability: 15%
+          progress_interval: 10ms
+      - addressable_twinkle:
+          name: Twinkle Heavy
+          twinkle_probability: 85%
+          progress_interval: 10ms
       - addressable_random_twinkle
       - addressable_fireworks
       - addressable_flicker
@@ -59,12 +70,22 @@ light:
       - addressable_rainbow
       - addressable_color_wipe
       - addressable_scan
-      - addressable_twinkle
+      - addressable_twinkle:
+          name: Twinkle Light
+          twinkle_probability: 5%
+          progress_interval: 10ms
+      - addressable_twinkle:
+          name: Twinkle Medium
+          twinkle_probability: 15%
+          progress_interval: 10ms
+      - addressable_twinkle:
+          name: Twinkle Heavy
+          twinkle_probability: 85%
+          progress_interval: 10ms
       - addressable_random_twinkle
       - addressable_fireworks
       - addressable_flicker
 
-
   - platform: neopixelbus
     name: "Headboard Lights"
     id: headboardlights
@@ -75,12 +96,21 @@ light:
       - addressable_rainbow
       - addressable_color_wipe
       - addressable_scan
-      - addressable_twinkle
-      - addressable_random_twinkle
+      - addressable_twinkle:
+          name: Twinkle Light
+          twinkle_probability: 5%
+          progress_interval: 10ms
+      - addressable_twinkle:
+          name: Twinkle Medium
+          twinkle_probability: 15%
+          progress_interval: 10ms
+      - addressable_twinkle:
+          name: Twinkle Heavy
+          twinkle_probability: 85%
+          progress_interval: 10ms
       - addressable_fireworks
       - addressable_flicker
 
-
   - platform: neopixelbus
     name: "Tree Lights"
     id: treelights
@@ -91,7 +121,22 @@ light:
       - addressable_rainbow
       - addressable_color_wipe
       - addressable_scan
-      - addressable_twinkle
+      - addressable_twinkle:
+          name: Twinkle Light
+          twinkle_probability: 5%
+          progress_interval: 10ms
+      - addressable_twinkle:
+          name: Twinkle Medium
+          twinkle_probability: 15%
+          progress_interval: 10ms
+      - addressable_twinkle:
+          name: Twinkle Heavy
+          twinkle_probability: 85%
+          progress_interval: 10ms
       - addressable_random_twinkle
       - addressable_fireworks
       - addressable_flicker
+
+button:
+  - platform: restart
+    name: "Restart"

bindicator.yaml

@@ -0,0 +1,101 @@
+esphome:
+  name: bindicator
+
+esp32:
+  board: esp32-c3-devkitm-1
+  framework:
+    type: arduino
+
+logger:
+ level: INfO
+ baud_rate: 0
+
+ota:
+  password: "bd2c004f2016fde90fbbb01706ad039a"
+
+wifi:
+  ssid: !secret ssid
+  password: !secret pass
+
+mqtt:
+  broker: mqtt.srv.jnf.me
+  username: esphome
+  password: esphome
+  topic_prefix: esphome/bindicator
+
+light:
+  - platform: neopixelbus
+    name: "Bindicator"
+    id: bindicator
+    variant: WS2812X
+    pin: 0
+    num_leds: 2
+    effects:
+      - lambda:
+          name: Pulsing
+          update_interval: 1s
+          lambda: |-
+            static int loopnum = 0;
+            auto call = id(bindicator).turn_on();
+            call.set_brightness(1);
+            call.set_transition_length(1000);
+
+            if (loopnum == 0) {
+              call.set_brightness(0.5);
+            } else if (loopnum == 1) {
+              call.set_brightness(1);
+            }
+            call.perform();
+            loopnum++;
+            if (loopnum == 30) loopnum = 0;
+  - platform: partition
+    name: "Bindicator - Bottom"
+    id: bindicatorbottom
+    segments:
+      - id: bindicator
+        from: 0
+        to: 0
+    effects:
+      - lambda:
+          name: Pulsing
+          update_interval: 1s
+          lambda: |-
+            static int loopnum = 0;
+            auto call = id(bindicatorbottom).turn_on();
+            call.set_brightness(1);
+            call.set_transition_length(1500);
+
+            if (loopnum == 0) {
+              call.set_brightness(0.5);
+            } else if (loopnum == 1) {
+              call.set_brightness(1);
+            }
+            call.perform();
+            loopnum++;
+            if (loopnum == 30) loopnum = 0;
+
+  - platform: partition
+    name: "Bindicator - Top"
+    id: bindicatortop
+    segments:
+      - id: bindicator
+        from: 1
+        to: 1
+    effects:
+      - lambda:
+          name: Pulsing
+          update_interval: 1s
+          lambda: |-
+            static int loopnum = 0;
+            auto call = id(bindicatortop).turn_on();
+            call.set_brightness(1);
+            call.set_transition_length(1500);
+
+            if (loopnum == 0) {
+              call.set_brightness(0.5);
+            } else if (loopnum == 1) {
+              call.set_brightness(1);
+            }
+            call.perform();
+            loopnum++;
+            if (loopnum == 30) loopnum = 0;

garage.yaml

@@ -15,7 +15,7 @@ wifi:
   fast_connect: true
 
 mqtt:
-  broker: henry.int.jnf.me
+  broker: mqtt.srv.jnf.me
   username: esphome
   password: esphome
   topic_prefix: esphome/garage
@@ -63,33 +63,39 @@ binary_sensor:
     device_class: door
     id: garage_door_open
     filters:
-      - invert:
-    on_press:
-      then:
-        - lambda: |-
-            id(garage_door_state).publish_state("Open");
-    on_release:
-      then:
-        - lambda: |-
-            id(garage_door).current_operation = COVER_OPERATION_CLOSING;
-            id(garage_door).publish_state();
-            id(garage_door_state).publish_state("Moving");
+      - invert
+    # on_press:
+    #   then:
+    #     - lambda: |-
+    #         //id(garage_door).current_operation = COVER_OPERATION_IDLE;
+    #         //id(garage_door).position = COVER_OPEN;
+    #         //id(garage_door_state).publish_state("Open");
+    # on_release:
+    #   then:
+    #     - lambda: |-
+    #         //id(garage_door).current_operation = COVER_OPERATION_CLOSING;
+    #         //id(garage_door).publish_state();
+    #         //id(garage_door_state).publish_state("Moving");
+
   - platform: gpio
     pin: D1
     id: garage_door_closed
     filters:
-      - invert:
+      - invert
     internal: true
-    on_press:
-      then:
-        - lambda: |-
-            id(garage_door_state).publish_state("Closed");
-    on_release:
-      then:
-        - lambda: |-
-            id(garage_door).current_operation = COVER_OPERATION_OPENING;
-            id(garage_door).publish_state();
-            id(garage_door_state).publish_state("Moving");
+    # on_press:
+    #   then:
+    #     - lambda: |-
+    #         //id(garage_door).current_operation = COVER_OPERATION_IDLE;
+    #         //id(garage_door).position = COVER_CLOSED;
+    #         //id(garage_door_state).publish_state("Closed");
+    # on_release:
+    #   then:
+    #     - lambda: |-
+    #         //id(garage_door).current_operation = COVER_OPERATION_OPENING;
+    #         //id(garage_door).publish_state();
+    #         //id(garage_door_state).publish_state("Moving");
+
   - platform: gpio
     pin: D2
     name: "Side Door"
@@ -155,4 +161,8 @@ cover:
           condition:
             binary_sensor.is_on: garage_door_open
           then: 
-            - switch.turn_on: garage_door_switch
+            - switch.turn_on: garage_door_switch
+
+button:
+  - platform: restart
+    name: "Restart"

houseplant.yaml

@@ -15,7 +15,7 @@ wifi:
   fast_connect: true
 
 mqtt:
-  broker: henry.int.jnf.me
+  broker: mqtt.srv.jnf.me
   username: esphome
   password: esphome
   topic_prefix: esphome/houseplant
@@ -37,4 +37,8 @@ sensor:
           url: !lambda |-
             return (std::string) "https://jasonsplant.jaywll.co/newreading?v=" + to_string(int(id(moisture_level).state));
           headers:
-            auth-key: !secret houseplant_key
+            auth-key: !secret houseplant_key
+
+button:
+  - platform: restart
+    name: "Restart"

laundry.yaml

@@ -1,127 +0,0 @@
-esphome:
-  name: laundry
-  platform: ESP8266
-  board: nodemcuv2
-
-logger:
-  level: INFO
-
-ota:
-  password: "03af999284928f8525c82a13771a4a4f"
-
-wifi:
-  ssid: !secret ssid
-  password: !secret pass
-  fast_connect: true
-  
-mqtt:
-  broker: henry.int.jnf.me
-  username: esphome
-  password: esphome
-  topic_prefix: esphome/laundry
-
-i2c:
-  sda: D6
-  scl: D5
-  scan: True
-  id: bus_a
-
-sensor:
-  - platform: mpu6050
-    address: 0x68
-    update_interval: 1s
-    gyro_x:
-      name: "Dryer Gyro X"
-      id: dryer_gyro_x
-      internal: true
-    gyro_y:
-      name: "Dryer Gyro Y"
-      id: dryer_gyro_y
-      internal: true
-    gyro_z:
-      name: "Dryer Gyro Z"
-      id: dryer_gyro_z
-      internal: true
-    temperature:
-      name: "Dryer Temperature"
-      filters:
-        - throttle: 30s
-  - platform: mpu6050
-    address: 0x69
-    update_interval: 1s
-    gyro_x:
-      name: "Washer Gyro X"
-      id: washer_gyro_x
-      internal: true
-    gyro_y:
-      name: "Washer Gyro Y"
-      id: washer_gyro_y
-      internal: true
-    gyro_z:
-      name: "Washer Gyro Z"
-      id: washer_gyro_z
-      internal: true
-    temperature:
-      name: "Washer Temperature"
-      filters:
-        - throttle: 30s
-  - platform: template
-    name: "Dryer Gyro All"
-    id: dryer_gyro_all
-    unit_of_measurement: °/s²
-    lambda: |-
-      return fabs(id(dryer_gyro_x).state) + fabs(id(dryer_gyro_y).state) + fabs(id(dryer_gyro_z).state);
-    update_interval: 1s
-    filters:
-      - lambda: |-
-          static float last_dryer_value = 0;
-          static float dryer_change = 0;
-          dryer_change = x - last_dryer_value;
-          last_dryer_value = x;
-          return fabs(dryer_change);
-      - sliding_window_moving_average:
-          window_size: 120
-          send_every: 10
-  - platform: template
-    name: "Washer Gyro All"
-    id: washer_gyro_all
-    unit_of_measurement: °/s²
-    lambda: |-
-      return fabs(id(washer_gyro_x).state) + fabs(id(washer_gyro_y).state) + fabs(id(washer_gyro_z).state);
-    update_interval: 1s
-    filters:
-      - lambda: |-
-          static float last_washer_value = 0;
-          static float washer_change = 0;
-          washer_change = x - last_washer_value;
-          last_washer_value = x;
-          return fabs(washer_change);
-      - sliding_window_moving_average:
-          window_size: 120
-          send_every: 10
-
-binary_sensor:
-  - platform: template
-    name: "Dryer"
-    id: dryer
-    lambda: |-
-      if (id(dryer_gyro_all).state >= 2.0) {
-        return true;
-      } else {
-        return false;
-      }
-    filters:
-      - delayed_on: 30s
-      - delayed_off: 60s
-  - platform: template
-    name: "Washer"
-    id: washer
-    lambda: |-
-      if (id(washer_gyro_all).state >= 1.0) {
-        return true;
-      } else {
-        return false;
-      }
-    filters:
-      - delayed_on: 30s
-      - delayed_off: 120s